Activated Alumina
Molecular Sieves
Tower Packing
Activated Carbon
Silica Gel
Click the number:6367 Entry time:2015/2/26 【Print this page】 【Close】
Clay Desiccants
Clay Desiccants
中文名:粘土干燥剂
Ideal molecular formula: (Mg, Al, Fe)5Si8O2O(HO)2(OH2)4·4H2O
Main chemical component
Component |
SiO2 |
Al2O3 |
Fe2O3 |
Na2O |
K2O |
Content % |
55.6-60.5 |
9.0-10.1 |
5.7-6.7 |
0.03-0.11 |
0.96-1.30 |
Component |
CaO |
MgO |
MnO |
TiO2 |
H2O |
Content % |
0.42-1.95 |
10.7-11.35 |
0.61 |
0.32-0.6 |
19.21 |
Specifications
Item |
Data |
Item |
Data |
Size |
2- 3mm |
Size Ratio up to Grade |
≥90% |
Rate of Moisture absorption |
≥50% |
Moisture in packing |
≤1.5% |
Bulk Density |
900±50g/l |
attrition rate |
≤1.5% |
Technical Parameters
Relative humidity |
Absorption |
RH=20% |
≥13.0 |
RH=50% |
≥27.0 |
RH=90% |
≥34.0 |
Loss in 140℃ |
2.0MAX |
Heat exchange capability |
0.08 |
Packing
25kgs carton, 30kgs drum or 150kgs drum with a liner in it.
Attention
Do not unpack the goods until ready for use, avoid prolonged exposure to air.
Should be packed as rapidly as possible when loading
Avoid touching with water, acid and alkaline
Relative humidity should be <90% when deposited
Introduction
Attapulgite also called Palygorskite, mineralogical classification belongs to family of sepiolite, is a kind of layer-chain structure of hydrous rich magnesium aluminum silicate clay mineral. Attapulgite has great specific surface area and certain ion exchange performance, most of positive ions, water molecules, a certain size of organic molecules can be adsorbed into its pore canal. Attapulgite has stable electrochemical performance, hard to be electrolytic flocculation, high stability at high temperatures and in salt water. Widely used for desiccant, anti-blushing agent, adsorbent, catalyst support, bacteriostat support.
Attapulgite clay desiccant working temperature should be under 50℃, if temperature over 50℃, water release is bigger than water uptake. But clay desiccant is very cheap, so it becomes one of main mineral desiccant in the world.
Clay Desiccant has no deformation and no fever after moisture absorption, very few water-soluble substances, no corrosion to metal.
It has the following characteristics:
1. Natural, non-toxic, tasteless, pollution-free, 100% natural degradation
2. Super hygroscopic capacity, stronger than silica gel. No reverse osmosis after moisture adsorption, can guarantee the desiccant packages is always in dry state
3. Selective adsorption of polar molecules, its adsorption capacity in turn is water > alcohol > aldehyde > ketone > alkene > neutral lipid > aromatic hydrocarbon > cyclanes > alkanes
4. Strong decolorization capacity. 75-85% Attapulgite decoloring capacity 110-130, is higher than active floridin
5. Has a strong sterilization, deodorant, detoxification, insecticide capability, can be used for protective device for adsorbing gas
6. Formed by the natural attapulgite, conform to the advanced industrial countries of the "4R" and "1D" standard
Clay desiccant is widely used in electronics, electrical appliances, food, clothing, electrical and mechanical equipment, military, marine transportation and other industries.
Application
It is used in products which can’t use oil seal or gaseous phase to seal up for keeping, such as optics instrument, electron products, leechdom health care, food packing, communications equipment, precision mechanism, semiconductor, war industry product and civilian industry product. It is used in above industry for dampproof and dehumidifying.